TECAN
4. The sunrise Touchscreen
2006-03 Instructions for Use for sunrise Absorbance Reader No. 30008746 Rev. No. 1.4 4-5
4.4.3 Printer Compatibility
The sunrise Touchscreen supports the following industry standard printer
languages:
• Hewlett-Packard PCL3 Compatible devices
• Selected Epson printers
Not only Hewlett-Packard printers support PCL3, but also the majority of the laser
printers. Please contact your printer provider or look up the printer specifications
on the Internet homepage of the printer manufacturer for further information.
Note
Printer languages up to PCL5E are compatible with PCL3. PCL6 is not
longer compatible with PCL3.
For further information see the Hewlett-Packard homepage.
For examples of supported printers refer to the
sunrise Touchscreen Color
instrument attached list ‘Selection of Compatible Printers’.
To connect the printer with the parallel interface at the back panel of the
instrument use a parallel cable of the type IEEE-1284 up to a maximum length of
3 meters.
To connect the printer with the USB interface at the back panel of the
Touchscreen use a USB 2.0 certified A - B cable up to a maximum length of
3 meters.
Note
To receive best printing performance under Magellan, adjust the printing
head. Connect the printer to a personal computer. Then install and
execute the according utility programs which are delivered with the
printer.
To Next Page
Loading...
