4. The sunrise Touchscreen
TECAN
4-6 Instructions for Use for sunrise Absorbance Reader No. 30008746 Rev. No. 1.4 2006-03
4.4.4 Handling the USB Stick
Driver Installation
For Windows 98/98SE a driver is required. If on your PC no USB driver for
storage tools is already installed please contact the local sales person to receive
the driver file. Execute the file and follow the on-screen instructions to complete
driver installation. Plug the USB stick into an available USB port. A new
Removable Disk drive with a newly assigned drive letter appears in the My
Computer window.
For Windows ME, 2000 and XP no driver is required. Simply plug the USB stick
into an available USB port, and Windows will install the files needed. A new
Removable Disk drive with a newly assigned drive letter appears in the My
Computer window.
How to Safely Plug and Unplug the USB Stick
After plugged in wait a minimum of 15 sec before the USB stick is recognized. It
is recognized when the LED lights steadily.
Caution
During operation it is not allowed to plug in more than one USB stick at
the same time. Otherwise data leakage may be possible.
Touchscreen Color option:
The USB stick has to be plugged into the appropriate port in the instrument
housing. The USB stick must not be plugged into the USB printer port.
Caution
Before removing the USB stick makes sure that the LED is steady and
not flashing. If USB stick is removed while the LED is flashing,
unpredictable damage to the files and/or USB stick may occur due to a
write cache issue.
Caution
During a Measurement, Evaluate Data, Create/Edit a Sample List,
Create/Edit a Method, Attach a Signature and Delete Files the USB stick
may not be removed.
To remove the USB stick from the Touchscreen unplug it directly when no data is
transferred, that is, the LED is not flashing. Remember that Magellan is saving
data during certain actions, so a storage medium is needed. Therefore the USB
stick may not be removed.
To remove the USB stick in Windows 98/98SE unplug it directly when no data is
transferred, that is, the LED is not flashing.
To remove the USB stick in Windows ME, 2000 and XP left click on the Unplug
or Eject Hardware icon on the system tray. A pop-up menu appears. Click to
continue. The Safe To Remove Hardware dialog appears. Confirm the dialog
with OK. The USB stick is now ready to be unplugged.
To Next Page
Loading...
