TECAN
3. Installation Procedure
2006-03 Instructions for Use for sunrise Absorbance Reader No. 30008746 Rev. No. 1.4 3-7
3.8.5 Define Measurement Mode
The following dialog box appears:
Select the appropriate measurement mode.
Click Next and the following dialog box appears:
These settings are not available for the
sunrise Absorbance Reader.
Click Finish and the following dialog box appears:
The measurement mode has now been set successfully.
If the filter values for the new Filter-slide have been defined, then the following
dialog box appears at the end of the program.
To Next Page
Loading...
