10 TEGAM WAY • GENEVA, OHIO 44041 • 440-466-6100 • FAX 440-466-6110 • sales@tegam.com
2-3
Do not Operate without Covers
This device should be operated with all panels and covers in place. Operation with missing panels or
covers could result in personal injury.
Preventive Maintenance
Preventive maintenance performed on a regular basis will improve the reliability of this instrument.
It may include cleaning (please refer to Section 6), visual inspection, or even monitoring the operating
environment.
FOR QUALIFIED SERVICE PERSONNEL ONLY
SERVICING SAFETY SUMMARY
Do Not Service Alone
Do not perform service or adjustment on this product unless another person capable of rendering first
aid is present. Installation and maintenance procedures described in this manual are to be performed
by qualified service personnel only.
Use Care When Servicing with Power On
Dangerous voltages may exist at several points in this product. To avoid personal injury or damage to
this equipment, avoid touching exposed connections or components while the power is on. Assure that
the power is off when removing panels, soldering, or replacing components.
Power Source
This product is intended to connect to a power source that will not apply more than 250 V
RMS
between
the supply conductors or between either supply conductor and ground. A protective ground connection
by way of the grounding conductor in the power cord is essential for safe operation.
To Next Page
Loading...
