10 TEGAM WAY • GENEVA, OHIO 44041 • 440-466-6100 • FAX 440-466-6110 • sales@tegam.com
1-4
ACCESSORIES SHEET
17501- Kelvin Klip™ Leads
Provides a solid four- terminal
connection to components under test.
These clips are particularly useful for
manual resistance measurement.
Cable length – 3 ft.
17504 – Kelvin Probes
These probes are excellent for
making four-wire surface resistance
measurements on films and other flat
metallic surfaces. Each probe has two
spring-loaded, replaceable tips that
are easily removed and replaced.
Cable length – 3 ft.
17510 –Chip Tweezers
Four-terminal tweezers make solid
connections to chip components in
manual sorting applications. Capacity of
jaws is 12.7 mm (0.5 in.). Contact tips
are replaceable (part no. 47422)
Cable length – 5 ft.
17502- Spade Lug Adapter
Used for connections between the
1750 front panel LEMO and existing
test fixtures.
Cable length – 3 ft.
17505 - Male LEMO Connector
& Strain Relief
For the repair or construction of 1750
test leads.
KK100- Kelvin Klip™ Rebuild Kit
Kelvin Klip™ replacements for construction
or repair of Kelvin Klip leads.
1583 - GPIB (IEEE-488) Cables
1583-3 – 1-meter GPIB buss cable
1583-6 – 2-meter GPIB buss cable
1583-9 – 3-meter GPIB buss cable
17503-Sorting Fixture
This sorting fixture allows for
efficient four-wire measurement of
leaded parts. The test fixture
features spring action contacts for
easy insertion and removal of test
components.
Cable length – 3 ft.
17507 – Large Kelvin Klip™
Leads
Provides a solid 4-terminal connection
to large components hat cannot be
measured with conventional Kelvin
clips. It is robust in construction,
ensuring a firm grip. Used for
connection with large bolts, cables,
plates, etc.
Cable length – 8 ft.
CA-22-36 – RS-232 Straight
Cable 9 pin
Male to Female DB9 straight cable used
to connect the 1750 to a PC via RS-
232.
Cable length – 3 ft.
To Next Page
Loading...
