10 TEGAM WAY • GENEVA, OHIO 44041 • 440-466-6100 • FAX 440-466-6110 • sales@tegam.com
1-10
MISCELLANEOUS SPECIFICATIONS
Display Modes:
• Resistance; Absolute Comparator; % Comparator
Digital Interfaces:
• IEEE-488
• RS-232
• RS-422
• External Trigger Input, and Reading Done TTL Outputs - BNC Connectors
Display:
• 4½ Digit alpha numeric readout; 2 X 16 Characters, Dot Matrix Display with backlight
Measurement Method:
• 4 terminal Kelvin connection to DUT.
Input Connector:
• Heavy Duty Type LEMO Connector for signal integrity and long life.
Input Protection:
• ± 15 V Continuous.
• Maximum Common Mode Input Voltage is 42 V peak.
Overload Current:
• Delayed Mode: 100% Overshoot, <25 μs
• Fast Mode: 200% Overshoot, < 30 μs
Noise Rejection:
• 60 dB Typical at Line Frequency
Maximum Open Circuit Compliance Voltage, (Typical):
Closed circuit compliance voltages are much lower; see Table 1.1, Full Scale Voltage as a
Function of Reference Current
• 18 Vp-p maximum (1 mA-1 A Test Current)
• 14 Vp-p maximum (100 nA-100 uA Test Current)
Environmental:
• Operating Temperature: 0 to 50 °C (32 to 122 °F), <80% RH; (Non-Condensing)
• Storage Temperature: -35 to 60 °C (-31 to 140 °F), <90% RH (Non-Condensing)
EMC:
• EN 61326-1:2013
To Next Page
Loading...
