General Safety Summary
x
1502C MTDR Service Manual
ground. A protective ground connection, by way of the grounding conductor in the
power cord, is essential for safe operation.
This product is grounded through the grounding conductor of the power cord. To
avoid electrical shock, plug the power cord into a properly wired receptacle before
connecting to the product input or output terminals. A protective ground connection
by way of the grounding conductor in the power cord is essential for safe operation.
Upon loss of the protective-ground connection, all accessible conductive parts
(including knobs and controls that appear to be insulating) can render an electric
shock.
Use only the power cord and connector specified for this product. Do not use this
instrument without a rated AC line cord.
The standard power cord (161–0288–00) is rated for outdoor use. All other optional
power cords are rated for indoor use only.
Use only a power cord that is in good condition.
Refer cord and connector changes to qualified service personnel.
To avoid fire hazard, use only a fuse of the correct type.
Refer fuse replacement to qualified service personnel.
To avoid explosion, do not operate this product in an explosive atmosphere unless
it has been specifically certified for such operation.
To avoid personal injury, do not remove the product covers or panels. Do not operate
the product without the covers and panels properly installed.
Grounding the Product
Danger Arising from Loss
of Ground
Use the Proper Power
Cord
Use the Proper Fuse
Do Not Operate in
Explosive Atmosphere
Do Not Remove Covers or
Panels
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
To Next Page
Loading...
Need help?
General
