Tektronix KEITHLEY 2450-EC - Configuring Current Pulse Settings

Models 2450
-, 2460-, & 2461-EC Potentiostats And Galvanostats User's Manual Section 5:
Current Pulse and Square Wave
077110402/November 2016 5-5
To adjust the Base Current:
1. From the Pulse Settings screen, select Base Current.
2. Enter a value.
Figure 89: Entering the Base Current
3. Select OK.
To adjust the Peak Current:
1. From the Pulse Settings screen, select Peak Current.
2. Enter a value.
Figure 90: Entering the Peak Current
3. Select OK.
To set the Potential Range:
1. From the Pulse Settings screen, select Potential Range.
2. Choose a value. Note that the choices are different depending on your galvanostat.
Figure 91: Selecting a Potential measure Range