HDLG7 HD Dual Link Video Generator module remote commands
Turns the black
and white mode on or off. When the current color space is
GBR, G data is copied to B and R field for getting a black and white display.
When the color space is YCbCr, the command has no effect.
:OUTPut1:CONVert:BLACkwhi te?
Returns the current black and white mode status.
:OUTPut1:CONVert:LINK:AUD io 0|1|2
Sets which link to place embedded audio on the input signal. The choices are
0 (Link A only), 1 (Link B only), and 2 (Link A and Link B).
:OUTPut1:CONVert:LINK:AUD io?
Returns the link to p lace embedded audio on the input signal.
:OUTPut1:CONVert:STATe?
Returns the video standard and sampling structure information from the
second line of the status display.
:OUTPut1:MOVe:HORizontal <nu meric_value>
Sets the amount of horizontal scrolling in the moving picture m ode. You can
set the value from -252 to +252 in 4 samples steps.
:OUTPut1:MOVe:HORizontal?
Returns the amount of horizontal scrolling in the moving picture mode.
:OUTPut1:MOVe:VERTical <nume ric_value>
Sets the amount of vertical scrolling in the moving picture mode. You can set
the value from -252 to +252 in 1 line steps.
:OUTPut1:MOVe:VERTical?
Returns the amount of vertical scrolling in the moving picture mode.
:OUTPut1:MOVe:PERiod <numeri c_value>
Sets the time interval between occurrences of the scrolling. You can set the
value from 1 to 16 in 1 field steps.
:OUTPut1:MOVe:PERiod?
Returns the time interval between occurrences of the scrolling.
:OUTPut1:MOVe:RANDom[:STA Te] ON|OFF
Turns the random scrolling mode on or off. You can also use 1 or 0 instead of
ON or OFF.
:OUTPut1:MOVe:RANDom[:STA Te]?
Returns the current state of the random scrolling m ode.
Draft
128 TG8000 Multiformat Test Signal Generator Programmer Manual
To Next Page
Loading...
Need help?
General
