Tektronix TG8000 Programmer's Manual

GPS7 GPS Synchronization and Timecode module remote commands
:SOURce:TIMES
et:AUTO:STATe?
Returns the setting of the automatic time offset function -OFF | ONCE |
RECUR.
:SOURce:TIMESet:AUTO:OFFS et <numeric_value>,<numeric_value>
(HH:MM)
Sets the offset value to use for the scheduled automatic offset. In
AUTO:STATE
RECUR mode, the numeric offset value must always be
positive; the sign should be ignored. In AUTO:STATE ONCE mode, the
offset value can be positive or negative.
:SOURce:TIMESet:AUTO:OFFS et?
Returns t
he offset value to use for the scheduled automatic offset.
:SOURce:TIMESet:AUTO:DATE
<numeri
c_value>,<numeric_value>,<nu meric_value> (YYYY:MM:DD)
Sets the d ate when the automatic offset will occur when the AUTO:STATE
is set t
oONCE.
:SOURce:TIMESet:AUTO:DATE ?
Returns the date when an automatic offset is scheduled to occur.
:SOURce:TIMESet:AUTO:TIME
<numeric_value>,<numeric_ value>,<numeric_value> (HH:MM:SS)
Sets the time when the automatic offset will occur when the AUTO:STATE
is set to ONCE.
:SOURce:TIMESet:AUTO:TIME ?
Returns the time of day when an automatic offset should occur.
:SOURce:TIMESet:AUTO:SDAT e <weekNo>, <weekDay>, <Month>
S
ets the date when the DST offset value is to be applied when the
AUTO:STATE is set to the RECUR mode.
Week Number: FIRST / SECOND / THIRD / FOURTH / LAST
Week Day: SUN / MON / TUE / WED / THU / FRI / SAT
Month: JAN / FEB / MAR / APR / MAY / JUN / J UL / AUG / SEP / OCT /
NOV / DEC
:SOURce:TIMESet:AUTO:EDAT e <weekNo>, <weekDay>, <Month>
Sets the date when the DST offset value is to be removed when the
AUTO:STATE is set to the RECUR mode.
Draft
86 TG8000 Multiformat Test Signal Generator Programmer Manual

Tektronix TG8000 Specifications

General

Brand	Tektronix
Model	TG8000
Category	Portable Generator
Language	English