Operating basics
Exterior cleaning
Perform the fol
lowing steps when you clean the exterior of the instrument:
WARNING. To avoid injury or death, unplug the power cord from line voltage
before cleaning the instrument. Avoid getting moisture inside the instrument
during extern
al cleaning. Use only enough liquid to dampen the cleaning cloth.
1. Remove loose dust on the outside of the instrument with a lint-free cloth.
2. Remove remaining dirt with a lint-free cloth dampened with a 75% isopropyl
alcohol-and-water solution. Do not use abrasive cleaners.
3. Clean the monitor screen with a lint-free cloth dampened with a 75%
isopropyl alcohol-and-water solution.
2–70 TG8000 Multiformat Test Signal Generator User Manual
To Next Page
Loading...
Need help?
General
