Tektronix TG8000

ATG7 Analog Test Generator module
ATG7 module ma
in menu
Use the ATG7 module main menu to perform the following tasks:
Set the text overlay on the SIGNAL output
Set the timing offset on the SIGNAL output
Set the APL settings on the SIGNAL output
Set the out
put parameters for the BLACK 1, BLACK 2, and BARS outputs
using the SELECT OUTPUT submenu. (See page 3-23.)
Use the up (▲)ordown(▼) arrow button to scroll through the main menu. The
following figure shows the ATG7 module main m enu.
Figure 3-10: ATG7 module main menu
TG8000 Multiformat Test Signal Generator User Manual 3–21