Tektronix TG8000 User Manual

SDI7 Dual Channel SD/HD/3G SDI Video Generator module
VOLTAGE MON 1. T
his diagnostic measures internal voltage supplies. If these
supplies are outside the nominal range, a warning appears, which means that the
instrument should be serviced.
VOLTAGE MON 2. This diagnostic measures internal voltage supplies. If these
supplies are outside the nominal range, a warning appears, which means that the
instrument
should be serviced.
VOLTAGE MON 3. This diagnostic measures internal voltage supplies. If these
supplies are outside the nominal range, a warning appears, which means that the
instrument should be serviced.
VOLTAGE M
ON 4. This diagnostic measures internal voltage supplies. If these
supplies are outside the nominal range, a warning appears, which means that the
instrument should be serviced.
SDI7 module
CALIBRATION submenu
This me
nu is accessible only when the instrument is in factory mode. From
this menu, you can access several special output signals and adjust the serial
output levels. The special signals are unscrambled and are synchronous with
the clock out of the trigger BNC. They are used to check performance or used
when adjusting serial levels. See the TG8000 Service Manual for information on
adjustments and using factory mode.
3–336 TG8000 Multiformat Test Signal Generator User Manual

Tektronix TG8000 Specifications

General

Brand	Tektronix
Model	TG8000
Category	Portable Generator
Language	English