Tektronix TG8000 User Manual

Operating basics
FORMAT b utton
When an ATG7, AV
G7, AW VG7, DVG7, HD3G7, HDLG7, HDVG7, or
SDI7 module is selected (active), use the FORMAT button to change the video
format for the output signal. Pressing this button d isplays the menu to allow you
to select a format for the active m odule.
Menu control bu ttons
Use these buttons to control the menu display. (See page 2-22, Mainframe menus.)
Arrow (▲), (
▼), (◄), and (►) Buttons. Use these arrow buttons to scroll through
the available menu items.
ENTER button. Use the ENTER button to enable the selected menu item.
BACK button. Use the BACK button to disable the selected menu item and return
to the pr
evious menu item.
Test signal buttons
Use these buttons to select the output test signals. Each of these 10 buttons
represents a signal set, or group of the same type of test signals. You scroll
throug
h the test signals in a signal set by repeatedly pressing the test signal button.
You can change the signal assignment using the SIGNAL KEY ASSIGN
subme
nu. (See page 2-37, SIGNAL KEY ASSIGN submenu.)
FRONT PANEL ENABLE
button
Use this button to enable or disable the front-panel buttons. When pressing this
button for about one second while the front-panel buttons are enabled, all of the
fro
nt-panel buttons are disabled. If you have selected a timeout period in the
FRONT PANEL DISABLE item in the UTILITY submenu, and that period passes
without a button push, all of the front-panel buttons are also disabled.
Press and hold this button for about three second to enable the front-panel buttons.
The timeout counter is restarted (if the timeout period is already set) and the
indicator next to the button lights to show that the front-panel is enabled.
Refer to UTILITY Submenu for more information about the settings the period
until the front panel times out. (See page 2-27.)
USB port
Use the USB port to upgrade the instrument firmware and to copy files such as
presets and test signal files between instruments.
(See page 2-53, How to upgrade the instrument firmware.)
(See page 2-67, How to transfer user files using FTP.)
2–2 TG8000 Multiformat Test Signal Generator User Manual

Tektronix TG8000 Specifications

General

Brand	Tektronix
Model	TG8000
Category	Portable Generator
Language	English