Section G – Dissolution Testing
CD14 Tester & CD AutoPlus Autosampler User Guide—75-108-800 Rev. B—31 May 2021 92 of 130
EAR99 technology subject to restrictions on cover page.
4. Test Options tab
Select the options as appropriate for the test.
The following options are available on the Test
Options screen.
Start Dissolution Test When Temperature Ready:
Starts the test when the bath temperature is within
specification. Requires automation.
Turn Heater Off After Test: This option causes the
CD14 Tester instrument to turn off the heater at the
end of the dissolution test in order to reduce power
consumption.
Auto Print Test Report: Determines if the test report
will automatically print at the end of the test.
Side A | Side B: This option is available to 6-vessel
methods and determines which side A (left) or B
(right) of the instrument will be used.
To Next Page
Loading...
