Versa User Manual www.teledynetekmar.com
Monthly Maintenance Checks
• Perform Daily and Weekly Checks
• Check System Pressure - Perform Set System Pressure in software by going to Tools | Set System Pressure.
• Run a Benchmark Test – This is a diagnostic test used to check the outputs of the Versa. From the Versa
TekLink™2G toolbar, select Tools | Benchmark. Enter a name for the benchmark test and click Start Benchmark. It
is recommended that you print out a copy of the results for your records.
• Transfer Line Tubing – Conrm that the tubing is routed so that the potential to be snagged or crimped is limited.
Annual Maintenance Checks
• Perform Monthly Checks
• Lubricate the Elevator Motor/Worm Gear Assembly (Contact Service Representative)
Note: The kit box includes most of the items needed for routine maintenance of the Versa.
Maintenance & Troubleshooting • Page 7-5
To Next Page