Versa User Manual www.teledynetekmar.com
IT IS IMPORTANT THAT YOU READ THIS PAGE BEFORE PROCEEDING!
Teledyne Tekmar designs, manufactures, and tests their products to meet many national and international standards.
The Versa is a sophisticated technical product and must be properly installed, operated, and maintained to ensure that
it operates within normal specications. You must adhere to and integrate the following instructions into your safety
program when installing, operating, and maintaining the Versa. Failure to follow the proper instructions may invalidate
the warranty.
• Read all instructions prior to installing, operating, and servicing the product. Follow all warnings, cautions, and
instructions marked on, and supplied with, the product and this manual. If you do not understand any of the
instructions, contact your Teledyne Tekmar representative for clarication.
• Educate your personnel in the proper installation, operation, and maintenance of the product. Only qualied
personnel should install, operate, update, program, and maintain the product.
• Install your equipment as specied in the Installation Section of this manual and according to applicable local and
national codes. Connect all products to the proper electrical and pressure sources.
• When replacement parts are required, ensure that qualied individuals use replacement parts specied by
Teledyne Tekmar. Unauthorized parts and products can aect the product’s performance and jeopardize safety.
Using look-alike substitutions may result in re, electrical hazards, or improper operation.
• Ensure that all equipment panels are secure and protective covers are in place (except when maintenance is being
performed by qualied personnel) to prevent electrical shock and personal injury.
Essential Instructions
Introduction • Page 1-2
To Next Page