Versa User Manual www.teledynetekmar.com
SYSTEM WILL NOT POWER UP
Is the power cord attached
to the unit and plugged into
the power receptacle?
Is the power switch in the ON
position? (Check wall switch
also, if applicable.)
Plug in
the cord
Flip power
switch to ON
Turn o and unplug the unit. Check the
fuses in the power module on the rear of
the unit. (The on/o switch is part of the
power module.) Are the fuses good?
Replace the fuse. Use
correct rating and type.
Has the circuit breaker
tripped?
Reset the
breaker.
Call Teledyne
Tekmar Customer
Service Center
800-874-2004
Try a dierent power
receptacle. Do not use
an extension cord! Does
unit have power?
Finished
No
No
No
No
No
Yes
Yes
Yes
Yes
Yes
Maintenance & Troubleshooting • Page 7-7