166
GPON ONT
7.2.2.5 “vlan” sub-node
7.2.2.5.1 “create” command
Name create
Description Creates a new LAN VLAN entry
Full path /lan/vlan/create
Arguments
<MANDATORY> --interface LAN interface
[OPTIONAL]
--taglist vid1/pbit1|...|vidN/pbitN
--vlan-mode VLAN Mode ON/OFF
Table 7-15: “create” command information
7.2.2.5.2 “remove” command
Name remove
Description Removes an existing entry on the LAN VLAN list
Full path /lan/vlan/remove
Arguments
<MANDATORY> --interface LAN interface
[OPTIONAL] --id Table Entry ID
Table 7-16: “remove” command information
7.2.3 “nat” node
This node allows a user to congure the NAT (Network Address Translation) settings.
+ nat[]
+ dmz-host[@cong, @show]
+ nat1:1[@create, @remove, @show]
+ port-triggering[@create, @remove, @show]
+ virtual-servers[@create, @remove, @show]
Figure 7-3: nat node tree