174
GPON ONT
7.2.5.3 “policer” sub-node
This sub-node is used to add a QoS policer.
7.2.5.3.1 “create” command
Name create
Description Creates a new policer
Full path /qos/policer/create
Arguments
<MANDATORY>
--commited-burst-size Committed Burst Size (bytes)
--commited-rate Committed Rate (kbps)
--enable Enable <yes|no>
--meter Meter type
<Simple Token Bucket(1)|Single Rate Three Color(2)|TwoRate Three Col-
or(3)>
--name Name
[OPTIONAL]
--conform-action Conforming Action <Null|DSCP> (Null by default)
--dscp DSCP Mark
--excess-burst-size Excess Burst Size (bytes)
--non-conform-action Nonconforming Action <Null|Drop|DSCP> (Null by
default)
--partial-conform-action Partial Conforming Action <Null|Drop|DSCP> (Null by
default)
--peek-burst-size Peak Burst Size (bytes)
--peek-rate Peak Rate (kbps)
Table 7-32: “create” command information
7.2.5.3.2 “remove” command
Name remove
Description Removes an existing policer
Full path /qos/policer/remove
Arguments
<MANDATORY> --key Key of entry to remove
Table 7-33: “remove” command information
To Next Page