Televes 769501 - Page 181

EN
181
7.2.8.1 Permissions
Command Admin Support User
/routing/defaultgw/cong Yes Yes No
/routing /defaultgw /show Yes Yes No
/routing /static-route/cong Yes Yes No
/routing /static-route/remove Yes Yes No
/routing /static-route/show Yes Yes Yes
Table 7-44: routing node and sub-node tree command permissions
7.2.8.2 “defaultgw” sub-node
Default gateway interface list can have multiple WAN interfaces served as system default gateways but only one will be used according to the
priority with the rst being the highest and the last one the lowest priority if the WAN interface is connected.
7.2.8.2.1 “cong” command
Name cong
Description Enters the default gateway interface list
Full path /routing/defaultgw/cong
Arguments
<MANDATORY> --default-mode Default gateway mode <WAN/LAN>
[OPTIONAL]
--default-gw6-ifc Default WAN IPv6 gateway
--default-list Selected Default Gateway Interfaces <intf1,...intfN>
--lan-address Default Gateway IP Address
--lan-bridge LAN Interface (Default by default)
Table 7-45: “cong” command information