Televes 769501 - Page 191

To Next Page

To Previous Page

191

7.2.17.5.3 “security-log” sub-node

This sub-node allows the user to see and to reset the security log.

7.2.17.5.4 “system-log” sub-node

This sub-node allows the user to see and to reset the system log.

7.2.17.5.5 “snmp” sub-node

This sub-node allows the user to see the congured SNMP client parameters, as well as congure those parameters.

7.2.17.5.5.1 “cong” command

Name cong

Description Congures the SNMP client

Full path /management/snmp/cong

Arguments

<MANDATORY> --agent SNMP Agent <enable|disable>

[OPTIONAL]

--auth-mode SNMPv3 Authentication Mode <MD5|SHA> (MD5 by default)

--auth-passphrase SNMPv3 Authentication Passphrase (password by default)

--auth-trap SNMPv3 Authentication Trap <Enable|Disable> (Disable by

default)

--permissions SNMPv3 Permissions <R|RW> (R by default)

--priv-mode SNMPv3 Privacy Mode <None|DES|AES> (None by default)

--priv-passphare SNMPv3 Privacy Passphrase

--read-community SNMPv2 Read community (public by default)

--set-community SNMPv2 Set community (private by default)

--system-contact System contact

--system-location System location

--system-name System name

--trap-manager-ip SNMPv3 Trap Manager IP Address (0.0.0.0 by default)

--trap-manager-ip SNMPv2 Trap Manager IP (0.0.0.0 by default)

--username SNMPv3 Username (default by default)

Table 7-67: “cong” command information