Televes 769501 - Page 82

To Next Page

To Previous Page

GPON ONT

Figure 5-77: Advanced Setup –LAN/ Lan VLAN setup window- Add and congure a Lan VLAN

Lan VLAN can be congured in advance as described before and not enabled. To Enable Lan VLAN afterwards, option “Enable VLAN Mode” must

be selected, and then the Save/Apply button used to nalize the conguration.

5.6.3.2 IPv6 Autocong

Selection of Advanced Setup submenu LAN, item will IPv6 Autocong an IPv6 VLAN Auto Conguration window is displayed in the main window

Figure 5-78. A short on line help text is provided in the conguration window.

For a typical IPv6 VAN Auto Conguration setting, shown in Figure 5-78, execute the following Steps, Figure 5-78:

STEP 1. Select Option “Enable DHCPv6 Server;

STEP 2. Selectthe option “Stateless”;

STEP 3. Select the option “Enable RADVD”;

STEP 4. Select the option “MLD Snooping”;

STEP 5. Select the option “Blocking Mode”;

STEP 6. To nalize the conguration use the Save/Apply button