Rev A:
0611
5/98
Preparation for Use
TEMPTRONlC
TP04100A
Interface
&
Applications
T7
CORPZ.RATtON
ThermoComm includes both a LabView Source-Code level Driver
and
a
built application. If installing the
Source-Code level driver, then LabView by National Instruments is required, and enables function on any
Windows platform:
3.1/95/NT.
LabView is not required if instding and running only the built application, but the built application without
LabView installed will function only on Windows
95
and NT.
For details, contact Temptronic Corporation.
Page
2-39
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com