Temptronic ThermoStream TP04100A - Start Test (St);End of Test (Eot);Stop on First Fail (SFF)

1
Remote Interfaces
Rev
A: 0611 5/98
TP04100A Interface & Applications /A\
L d
TEMPTRONIC
CCRWRATITIOI I I '
I
4-7 Start Test [ST]/ End of Test [EOT]/
Stop on First Fail [SFF]
9 1
1
This interface is three solid state relay (SSR) closures: 1 closure to start test, 1 closure to end test, and 1
i
closure for stop on first failure (see Figure 4-2, below). Set input and output pulse polarity using the ConJigure
System Screen
(see Section 3).
,
I
i
The connector pinout is provided in Table 4-3.
OPTU COUPLERS 1
STOP
Figure 4-2 ST/EOT/SFF Interface
ON FIRST
u
13651A
FAIL
Page 4-6
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com