110
Application Scenario
User A purchases a wireless router for wireless coverage in his apartment. The router (Router A) is placed in the
living room. The WiFi signals are strong in the living room, but too poor in the bedroom and study room to access
the internet.
Solution
To improve internet connectivity, the user can add a V300 modem router and configure the wireless bridge
function of the router to extend the WiFi network coverage. That will eliminate blind areas in the apartment,
enabling the user to access the internet anywhere in the apartment.
Assume that:
Enable access point function to extend the wireless network.
The wireless information of the upstream wireless router is shown in the following table:
Procedure:
Step 1 Configure the modem router.
1. Set the LAN IP of the modem router to one that is in the same network segment but different from
that of the upstream wireless router. For example, the LAN IP of the upstream wireless router is
192.168.1.1, and then we can set the LAN IP of the modem router to 192.168.1.10.
(1) Choose Advanced > Advanced Setup > LAN to enter the configuration page.
(2) Set the IP Address to 192.168.1.10.
(3) Click Apply/Save.
Change the wireless channel, encryption, and password to the same as those of the upstream router.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
