Tenda V300 - Page 20

12
IPoE
Dynamic IP
Use thus type if you can access the internet only after setting a static IP address and other related information on
your computer.
Step 1 Log in to the web UI and enter the Home page.
Step 2 Link Type: Select Ethernet.
Step 3 Connection Type: Select IPoE.
Step 4 Address Mode: Select Dynamic IP.
Step 5 Click OK on the bottom of the page to apply the settings.
--End
Static IP
Use thus type if you can access the internet only after setting a static IP address and other related information on
your computer.
Step 1 Log in to the web UI and enter the Home page.