Select thus type if your ISP provides a static IP address and other
related information to you for internet access.
Select thus type when this device only serves as a modem, and you
want to set up a dial-up connection or enter other internet parameters
directly on your computer for internet access.
Step 5 Select PPP over Ethernet.
Step 6 Network Protocol Selection: Select your network protocol type. The modem router provides three
types of network protocol: IPv4 Only, IPv4&IPv6, and IPv6 Only. Here take IPv4 Only as an example.
Step 7 Click Next.
Step 8 PPP Username/PPP Password/: Enter the PPPoE user name and password provided by your ISP.
Step 9 (Optional) PPPoE Service: Enter the PPPoE service name if it is provided.
Optional Step: MAC Clone
To Next Page
Loading...
