TESTO 400 - PC Software and Support; Testo DataControl PC Software

13 testo DataControl PC software
102
Characteristics Measuring range Accuracy Resolutio
n
Differential
pressure
2
-100 to +200 hPa
±(0.3 Pa + 1% of m.v.)
(0 to 25 hPa)
±(0.1 hPa + 1.5 % of m.v.)
(25.001 to 200 hPa)
0.001 hPa
Absolute
pressure
+700 to +1100 hPa
±3 hPa
0.1 hPa
1
The accuracy information applies in an adjusted, stable temperature state.
Plugging in the mains unit, charging the battery or adding digital probes can
distort this temporarily, and additional errors may occur.
2
The accuracy specification applies immediately after zeroing of the sensor. For
long-term measurements, mains operation with fully-charged battery is
recommended.
13 testo DataControl PC software
13.1 General information
The testo 400 has a USB port, via which the measuring instrument can be
connected to the PC.
Knowledge of Windows
®
operating systems is required to work with the
software.
13.2 Purpose
The testo DataControl measurement data management and analysis software
enhances the functionality of the testo 400 measuring instrument by adding lots
of useful functions:
• Manage and archive customer data and measuring site information
• Read out, evaluate and archive measurement data
• Presenting readings in graphic form
• Create professional measurement reports from the existing measurement
data
• Conveniently add pictures and comments to measurement reports
• Data import from and data export to the measuring instrument