TESTO 400 - With Testo 400 Connected

14 IAQ data logger
132
14.7.1 With testo 400 connected

testo 400 and the IAQ data logger are
connected to each other. The testo
400 displays an overview of the
current measurement with the
configured settings.
1
Click on Stop Measurement.

Measurement results are saved automatically.
2
Disconnect the testo 400 from the IAQ data logger.

testo 400 can be used for other measurements.
If the testo 400 was connected to the IAQ data logger for the
measurement procedure, then the measurement is automatically stored
on the measuring instrument.