TESTO 400 - Calling up the Tutorial; Calling up the Quickstart Guide;Detailed Instructions

10 Settings
98
It is possible to check manually whether updates for the app or firmware are
currently available.
1
Enable Automatically check for updates with the slider.
2
Click on Check for updates.

The system searches for updates.
3
Follow the instructions.
Automatic probe update can be enabled or disabled.
>
Enable or disable Automatic probe update with the slider (see Section
8.6.3).
10.4.2 Calling up the tutorial
1
Click on .

Main menu opens.
2
Click on Help and Information.

The Help and Information menu opens.
3
Click on Tutorial.

The tutorial shows you the most important steps prior to
commissioning.
10.4.3 Calling up the Quickstart Guide/detailed
instructions
1
Click on .

Main menu opens.
2
Click on Help and Information.

The Help and Information menu opens.