TESTO 400 - Page 17

8 Commissioning
17
Current
status
Action Function
When the measuring instrument is started for the first time, the setup
wizard guides you through the following setting parameters step by
step:
- Language
- Country
- Units
- WLAN
- Date and time
- Own company address
- E-mail account
After the setup wizard, a tutorial can be launched. The tutorial
demonstrates the general o
peration and the most important functions of
the measuring instrument using examples.
Instrument on
Press the button briefly
(< 1 sec)
Instrument is switched to
standby mode. The instrument
is re-activated when the button
is pressed again.
Instrument on
Press and hold down the
button (> 1 sec)
Choice: press [OK] to switch the
instrument off or press [Cancel]
to cancel switch-off of the
instrument.
The tutorial can be executed again at any time in the main menu under
Help and Information.
Measuring values that have not been saved are lost when the
measuring instrument is switched off.