Texas Instruments DLP LightCrafter 4500 User Manual

www.ti.com PC Software
3.2.3 Image Orientation
Beneath Operating Mode, the Image Orientation controls the long and short axis flips to support front,
rear, table, and ceiling mounted projection. The Image Orientation occurs on the next image or frame load
in Video mode, and on the next download to the DLP LightCrafter 4500 in Pattern Sequence mode.
• East/West Flip: If checked, the image is flipped along the east and west axis of the projected image.
Usual table front projection has this setting unchecked. Otherwise, the image is flipped horizontally.
• North/South Flip: If checked, the image is flipped along the north and south axis of the projected
image. Usual table front projection has this setting unchecked. Otherwise, the image is flipped
vertically.
27
DLPU011E–July 2013–Revised September 2015 Operating the DLP LightCrafter 4500
Submit Documentation Feedback
Copyright © 2013–2015, Texas Instruments Incorporated

Texas Instruments DLP LightCrafter 4500 Specifications

General

Brand	Texas Instruments
Model	DLP LightCrafter 4500
Category	Motherboard
Language	English