17
We will also need a separate standalone programmer GUI tool. Why? Because it looks totally stupid
to open the heavy CCS software every time to upload a code to a new target after having built the
final code for it. For this purpose, we will need UniFlash programmer GUI.
UniFlash can be downloaded from http://www.ti.com/tool/uniflash or can be accessed via TI cloud.
Additionally, I recommend installing and using Sublime Text (https://www.sublimetext.com/3) or
Notepad++ (https://notepad-plus-plus.org/download/v7.4.2.html) as a code viewer/editor.
Make sure you also downloaded Launchpad board drivers from here:
http://www.ti.com/lit/sw/slac524/slac524.zip.
To Next Page
Loading...
Need help?
General
