7
TMS570LS0714
www.ti.com
SPNS226E –JUNE 2013–REVISED NOVEMBER 2016
Submit Documentation Feedback
Product Folder Links: TMS570LS0714
Revision HistoryCopyright © 2013–2016, Texas Instruments Incorporated
2 Revision History
NOTE: Page numbers for previous revisions may differ from page numbers in the current version.
This data manual revision history highlights the technical changes made to the SPNS226D device-specific
data manual to make it an SPNS226E revision.
Scope: Applicable updates to the TMS570LS0714 device family, specifically relating to the
TMS570LS0714 devices (Silicon Revision A), which are now in the production data (PD) stage of
development have been incorporated.
Changes from September 15, 2015 to November 1, 2016 (from D Revision (September 2015) to E Revision) Page
• GLOBAL: PZ package is now fully qualified ...................................................................................... 1
• Section 1.1 (Features): Updated/Changed the GIO pin count in GIO bullet.................................................. 1
• Section 1.1: Updated/Changed the SPI features bullet.......................................................................... 1
• Section 3.1 (Related Products): Added new section. ............................................................................ 8
• Section 4.2 (Signal Descriptions): Updated/Changed reference to Technical Reference Manual ....................... 11
• Table 4-2 (PGE Enhanced High-End Timer Modules (N2HET)): Added a description for pins 14 and 55
(N2HET1_PIN_nDIS and N2HET2_PIN_nDIS, respectively).................................................................. 13
• Table 4-20 (PZ Enhanced High-End Timer Modules (N2HET)): Added Pin 10, GIOA[5] / INT[5] / EXTCLKIN
/EPWM1A/N2HET1_PIN_nDIS.................................................................................................... 22
• Table 6-20 (Device Memory Map): Updated/Changed the FRAME SIZE column value for "Flash Data Space
ECC" under Flash Module Bus2 Interface from "768KB" to "1MB"........................................................... 62
• Section 6.19 (Digital Windowed Watchdog): Added Figure 6-13, Digital Windowed Watchdog Example............... 87
• Table 7-11 (eCAPx Clock Enable Control): Updated/Changed "ePWM" to "eCAP" in MODULE INSTANCE
column............................................................................................................................... 103
• Table 7-15 (eQEPx Clock Enable Control): Updated/Changed "ePWM" to "eQEP" in MODULE INSTANCE
column............................................................................................................................... 106
• Table 7-20 (MibADC1 Trigger Event Hookup): Added lead-in paragraph referencing the table ........................ 108
• Table 7-21 (MibADC2 Event Trigger Hookup): Added lead-in paragraph referencing the table ........................ 110
• Figure 7-11 (ePWM1SOC1A Switch Implementation): Added missing ePWM1 SOC1A detailed switch
connection example and lead-in reference sentence ......................................................................... 114
• Section 9.1 (Getting Started and Next Steps): Added new section ......................................................... 145
• Section 9.2 (Device and Development-Support Tool Nomenclature): Moved subsection after "Getting Started
and Next Steps" subsection (new) .............................................................................................. 145
• Section 9.9.1 Added the address of the Device ID register. ................................................................. 151
To Next Page
Loading...
Need help?
General
