TI-89 / TI-92 Plus / Voyage™ 200 PLT Statistics with List Editor App List Editor 22
Removing Lists
(continued)
Removing All Lists and Restoring list1 through list6
To remove all user-created lists and restore list names list1- list6 to columns 1 - 6:
¦ Press ƒ (Tools) and select 3:Setup Editor to display the Setup Editor dialog box. Then
press ¸ to close the
Setup Editor dialog box without entering any list names in the
Lists To View dialog box.
¦ Reset all memory.
Note: Resetting the memory deletes all lists from memory.
Clearing Elements from a List
¦ To clear list elements from the Stats/List Editor, use either of these two methods:
- ‘ Highlight the list (
list1). Press ‘ Í or ‘ A or B. Or, press
‘ D to clear the elements.
&
- 0 Highlight the first element of the list (list1). Press 0 to delete the element (5).
&
¦ To clear list elements of a specified list from the Home screen, use the clrList( command.
1. To display the Home screen press,
- " for the TI-89
- ¥ " for the TI-92 Plus
- Press ¥ " for the Voyage™ 200 PLT
2. To select the
clrList( function from the … (Flash Apps) catalog press,
- ½ … (
List) C for the TI-89
- 2 ½ … (
List) C for the TI-92 Plus / Voyage 200 PLT
3. Move the ú indicator to the
clrList( function, press ¸ to paste clrList( to the
entry line, enter the list name (
list1), press d, then and press ¸ to clear the
elements in the list.
Note: TIStat.clrlist(list1) and the Done message are
displayed when the list is cleared.
To Next Page
Loading...
Need help?
General
