TI-89 / TI-92 Plus / Voyage™ 200 PLT Statistics with List Editor App … List Menu 48
Fill
Description
… (
List) Æ 2:Ops Æ 4:Fill
Fill replaces each element in a List with a specified Value. (See the Fill dialog box below.)
Example
Setup:
list1={1,2,3,4,5,6}
1. Highlight a list name or any element (
1) in a list.
2. Press … (List) and select 2:Ops. Then select 4:Fill to display the Fill dialog box. Enter
the list name (
list1) that you want to fill in the List field and the value (1.01) that you
want to fill the list with in the
Value field as shown.
Tip: You can press 2 °, highlight a list,
and then press ¸ to paste the list name into
the list editor. Be sure to close arguments with a
right parenthesis (d).
You can also press … (List) and select 1:Names
to display the VAR-LINK [All] menu.
3. Press ¸ to display the fill values.
All of the elements in list1 are replaced
with the fill value 1.01
To Next Page
Loading...
Need help?
General
