EN - 10
4 Product description EX-TRAFIRE
®
45HD
ON/OFF switch (A) Used to switch the device on and off.
CNC interface
connection (B)
This optional interface is used to connect the
device to an optional CNC cutting table or
robot.
Gas connection (C) This interface is used to connect a
compressed air supply.
BUS interface (D) This optional interface is used to connect the
optional CAN BUS or RS485/422 BUS.
Multi-function button (H) For toggling between two menus and
setting the cutting parameters.
Digital display (I) Displays the device status. A fault code is
displayed if an error occurs.
To Next Page
Loading...
