EN - 4
1 Identification EX-TRAFIRE
®
45HD
1 Identification
The EX-TRAFIRE
®
45HD is a portable cutting power supply for mechanized
and manual plasma cutting, gouging, and marking. The EX-TRAFIRE
®
45HD
uses gas, argon or nitrogen to cut almost all conductive metals. The device
may be operated only with original Thermacut
®
parts. This documentation
describes the EX-TRAFIRE
®
45HD cutting power supply only.
When used in this documentation, the term “device” always refers to the
EX-TRAFIRE
®
45HD cutting power supply.
1.1 Marking
This product fulfills the requirements that apply to the market to which it
has been introduced. A corresponding marking has been affixed to the
product, if required.
1.2 Identification plate
The device is labeled by means of an identification plate on the housing
located under the machine.
For inquiries, please have at hand the device type and device number
per the identification plate.
1.3 Signs and symbols used
The following signs and symbols are used:
Fig. 1 EX-TRAFIRE
®
45HD identification plate
General instructions.
Action(s) to be carried out in succession.
Lists.
Cross-reference symbol refers to detailed, supplementary or further
information.
Caption, item description.
A
To Next Page
Loading...
