EX-TRAFIRE
®
45HD 5 Transport and positioning
EN - 15
5 Transport and positioning
Risk of injury due to improper transport and installation
Improper transport and installation can cause the device to tip or fall
over. This may result in serious injury.
• Wear your personal protective equipment.
• Ensure that all supply lines and cables do not encroach into the area in
which employees are working.
• Place the device on a suitable surface (flat, solid, and dry) on which it
will not topple over, taking into account the max. tilt angle of 15°.
• Note the weight of the device when lifting it.
4.2 Technical data on page EN-11
• Use an appropriate lifting tool with load handling equipment for
transporting and installing the device.
• Avoid abrupt lifting and setting down.
• Do not lift the device over individuals or other devices.
• Use the attachment points provided.
Risk of material damage due to improper transport and installation
Improper transport or installation can cause the device to tip or fall over.
This can result in material damage and irreparable damage to the
device.
• Protect the device against weather conditions, such as rain and direct
sunlight.
• Protect the device from spatter when cutting.
• Protect the device from direct exposure to sparks when grinding.
• Use the device only in dry, clean, and well-ventilated rooms.
• Maintain a minimum distance of 0.5 m from the wall when positioning
the device to ensure that it has sufficient ventilation.
When positioning the device, make
sure that the water separator's drain
opening is not covered.
To Next Page
Loading...
