EX-TRAFIRE
®
45HD 19 Cutting tables for mechanical cutting
EN - 55
19 Cutting tables for mechanical cutting
Cutting tables serve as a guideline for mechanical cutting. Individual
systems can be “fine tuned” to achieve optimum cutting quality.
Recommended speed:
Speeds adjusted for cutting capacity do not necessarily represent
maximum speeds. They are the speeds that must be achieved for the
specified material thickness.
Maximum speed:
The maximum cutting speeds are the result of in-depth laboratory
testing. Actual cutting speeds may vary due to different cutting
applications.
Configuration without protective cap:
If consumables are used without a shield, either the torch must be
manually adjusted to the working height, or the arc voltage control
(AVC) settings must be selected to achieve the desired cutting quality.
To Next Page
Loading...
