EX-TRAFIRE
®
45HD 12 Disposal
EN - 41
12 Disposal
12.1 Disposal of materials
This product is mainly made of metallic materials that can be melted in
steel and iron works and are thus almost infinitely recyclable. The plastic
materials used are labeled in preparation for their sorting and separation
for later recycling.
12.2 Disposal of consumables
Oil, greases and cleaning agents must not contaminate the ground or
enter the sewage system. These substances must be stored, transported
and disposed of in suitable containers. Observe the relevant local
regulations and disposal instructions in the safety data sheets specified by
the manufacturer of the consumables. Contaminated cleaning tools
(brushes, rags, etc.) must also be disposed of in accordance with the
information provided by the consumables' manufacturer.
Observe the relevant local regulations and disposal instructions in the
safety data sheets specified by the manufacturer of the consumables.
12.3 Packaging
Thermacut
®
has reduced the packaging to the necessary minimum. The
ability to recycle packaging materials is always considered during their
selection.
Equipment marked with this symbol is covered by European
Directive 2012/19/EU on waste electrical and electronic
equipment (WEEE).
Do not dispose of electrical and electronic equipment with
household waste.
Disassemble electrical equipment prior to proper
disposal.
11 Disassembly on page EN-40
Collect electrical components separately and recycle in an
environmentally responsible manner.
Observe local regulations, laws, provisions, standards and
guidelines.
Please consult the responsible local authority for
information about collection and return of electrical
devices.
To Next Page
Loading...
