Controller Operation 7-24
Electric Standby/Diesel Mode. Select Electric Standby/Diesel Mode as follows:
1. Press the Menu soft key on the Standard Display.
2. Press the Next soft key as required to display the Electric Standby/Diesel Mode Screen.
3. Press the Select soft key to select the mode shown on the display.
Adjust Brightness. Allows the operator to adjust the display intensity as follows:
1. Press the Menu soft key on the Standard Display.
2. Press the Back and Next soft keys as required to show the the Adjust Brightness Menu.
3. Press the + or - soft keys to select the desired brightness.
4. Press the Yes soft key to enter the new brightness level.
5. The selected level appears on the screen.
The Adjust Brightness Main Menu Screen reappears and if no keys are pressed the Standard Display appears.
Time. Allows the operator to view the Time and Date. The Time is displayed in 24 hour military time.
1. Press the Menu soft key on the Standard Display.
2. Press the Next soft key until the Time Display appears.
3. Press the Select soft key to view the time and date.
To Next Page
Loading...
Need help?
General
