Specifications 3-11
STANDBY POWER REQUIREMENTS
REMOTE EVAPORATOR SPECIFICATIONS
ELECTRIC STANDBY
(Model 50 only)
Electric Heater Strips (optional):
SMX, SMX-II and SL-300, SL-400, SL-400e, SLX, SLXe, SLXi)
Number 3
Watts (each) 1000
Resistance (cold and disconnected) 122 ohms
*Electric heater strips are standard on SLXi, SLXe, SLX, SL-400 and SL-400e models, and not available on SL-100, SL-100e, SL-200 and
SL-200e models.
**Models with a TG-VI, µP-IV, µP-V or µP-VI controller use the evaporator coil sensor to provide evaporator high temperature protection.
ELECTRIC DRIVE MOTOR
SL, SLe, SLX, SLXe and SLXi
400/3/50 380/3/50 190/3/50 460/3/60 230/3/60
Horsepower 11.7 11.7 11.7 14.0 14.0
Kilowatts 8.7 8.7 8.7 10.4 10.4
RPM 1450 1450 1450 1755 1755
Full Load Amps 19.0 19.0 38.0 18.9 37.8
Overload Relay Setting (Amps) 20 20 40 20 40
SLX Ferry
400/3/50 380/3/50 190/3/50 460/3/60 230/3/60
Horsepower 11.7 11.7 11.7
Kilowatts 14.7 14.7 14.7
RPM 1450 1450 1450
Full Load Amps 19.0 19.0 38.0
Overload Relay Setting (Amps) 20 20 40
Supply Circuit Breaker:
All models 70 ampere for 190-230/3/50-60
40 ampere for 380-460/3/50-60
Extension Cord Size:
190-230/3/50-60: Up to 15 m 10 mm
2
Over 15 m 16 mm
2
380-460/3/50-60: Up to 15 m 6 mm
2
Over 15 m 10 mm
2
Refrigeration System
Evaporator Coil Type Direct Expansion
Refrigerant Type
R-404A
R-452A (released as an option January 2015)
Heat/Defrost Method Hot Gas
Electrical
Control System Voltage 12.5 Vdc
Circuit Protection
Smart FETs in the Expansion Module
Fan Motors (each): Power Rating 0.13 hp (100 Watts)
rpm 2500
Full Load Amps 7.0 amps (per motor) (6.0 amps - S-2 from Jan 2012)
To Next Page
Loading...
Need help?
General
