Engine Maintenance 9-50
Clutch drive tensioning Schematic SLXe and SLXi
Note: Engine Belt Tension for these units is set by position not by frequency method.
Set Engine Belt Tension by setting Centre to centre dimension between tensioning element screws & checking using checking
gauge - 139.0mm tensioning gauge tool (P/N: 2042436)
Description of SLXe and SLXi tensioning system
Warning: Only use the screws provided with the tensioning system. Use appropriate tools and respect maximum torque to
tighten the screws. The tensioner element must not be cut by contact with any sharp object.
To Next Page
Loading...
Need help?
General
