Maintenance Inspection Schedule 4-8
UNIT MODELS: ALL SLX, SLXe RANGE AND SPECTRUM MODELS HOST UNIT
The service technician is responsible for assessing the condition of
all parts & components found during any service operation to be
in a condition suitable for further operation up to the next
scheduled service. If parts not considered in suitable condition
they should be replaced.
Check/Inspect/Adjust/Change/Replace
INSPECTION
A SERVICE
Every 1000 hours
Or every 12
Months
(whichever comes
first)
B SERVICE
Every 3000
hours
Or every 24
Months
(whichever
comes first)
SERVICE
C SERVICE
Every 6000 hours
Or every 48
Months
(whichever comes
first)
EDAC Labour standard
1.5 hr 2.5 hrs 7.5 hrs
For SPECTRUM
8.0 hrs
* Replace compressor oil filter when compressor drive belt is
replaced.
Structural & Trailer Body
Check all doors: operation & hardware security
Visually inspect unit for damaged, loose or broken skins, parts &
fittings (includes air ducts and bulkheads)
Check all unit mounting bolts, external mounted equipment &
wiring, hoses, fuel lines etc.
Clean copper tube and fin condenser
Clean micro-channel condenser
Clean evaporator coil and defrost drains of debris.
Miscellaneous
Check accuracy of return and discharge sensors as per local
regulations
Check operation of all unit attached accessories Thermo King and
non Thermo King.
Check service records and ensure all service and warranty
modifications have been completed. Upgrades not included.
To Next Page
Loading...
Need help?
General
