Preface
xviii TSQ Series Hardware Manual Thermo Scientific
• H-ESI Probe User Guide
• HESI-II Probe User Guide
• Ion Max and Ion Max-S API Source Hardware Manual
• Help available from within the software
Safety and Special Notices
Make sure you follow the precautionary statements presented in this guide. The safety and
other special notices appear in boxes.
Safety and special notices include the following:
Safety Precautions
Observe the following safety precautions when you operate or perform service on the mass
spectrometer.
CAUTION Highlights hazards to humans, property, or the environment. Each CAUTION
notice is accompanied by an appropriate CAUTION symbol.
IMPORTANT Highlights information necessary to prevent damage to software, loss of
data, or invalid test results; or might contain information that is critical for optimal
performance of the system.
Note Highlights information of general interest.
Tip Highlights helpful information that can make a task easier.
CAUTION Do not perform any servicing other than that contained in the TSQ Series
Hardware Manual. To avoid personal injury or damage to the instrument, do not
perform any servicing other than that contained in the TSQ Series Hardware Manual or
related manuals unless you are authorized to do so.
CAUTION Shut down the mass spectrometer and disconnect it from line power before
you service it. High voltages capable of causing personal injury are used in the
instrument. Some maintenance procedures require that the mass spectrometer be shut
down and disconnected from line power before service is performed. Do not operate the
mass spectrometer with the top or side covers off. Do not remove protective covers from
printed circuit boards (PCBs).
To Next Page
Loading...
Need help?
General
