- 34 -
6.4.3 UPNP
The system acts as a daemon when you enable it and select WAN interface (upstream) that will
use UPnP. If an internet user wants to access the server of a specific interface in the internal
network, the user needs to set port mapping.
UPnP Enable or disable the UPnP function.
WAN interface The interface Which runs UPnP function.
6.4.4 RIP
Enable the RIP if you are using this device as a RIP-enabled Router to communicate with others
via the Routing Information Protocol. This page is used to select the interfaces on your device that
use RIP and the version of the protocol used.
To Next Page
Loading...