- 62 -
TR069 Enable or Disable the TR069 function.
URL ACS URL.
User Name The username the RG device should use when connecting to the ACS.
Password The password the RG device should use when connecting to the ACS.
Periodic Inform When this field is enabled, the RG device will send an Inform RPC to
the ACS server at the system startup, and will continue to send it
periodically at an interval time. Periodic Inform Interval field defines
the period; When this field is disabled, the RG device will only send
Inform RPC to the ACS server once at the system startup.
Interval Time interval in second to send Inform RPC.
Connection Request
User Name The username the remote ACS should use when connecting to this
device.
Password The password the remote ACS should use when connecting to this
device.
6.7.9 Ping & Ping6
Once you have configured your RG device, it is a good idea to make sure you can ping the
network. A ping command sends a message to the host you specify. If the host receives the
message, it will send messages in reply. To use it, you must know the IP address of the host you
are trying to communicate with and enter the IP address in the Host Address field. Click Go! to
start the ping command, the ping result will then be shown in this page.
To Next Page
Loading...