- 1 -
1. OBJECTIVE
The objective of this document is to carry out the Work Instruction (WI) GUI to provide step-
by-step instruction for customer to ensure inter-connection between the Residential
Gateway GUI user configuration and Internet network. This is a mandatory requirement for
all customer equipment before it is connected to UNIFI services.
2. INTRODUCTION
Thank you for purchasing the RGX4400.
The RGX4400 delivers next generation wireless speed and coverage to all your Wi-Fi
devices, offering dual-band Gigabit wireless with all-new 802.11ac Wi-Fi. Its powerful dual-
core CPU provides the best performance in both 2.4GHz and 5GHz. The 5GHz band works
at up to 867Mbps, while the 2.4GHz frequency tops 300Mbps, serving an incredible
combined bandwidth of 1167Mbps
The RGX4400 also provides secure wireless communication. It supports not only 64/128-bits
WEP, but also up-to-date encryptions including WPA/WPA2-PSK with TKIP/AES, wireless
MAC filtering and SSID broadcast control to consolidate the wireless network security and
prevent unauthorized wireless connection.
The Web-based user interface of the RGX4400 makes it extremely easy to install and
manage the network. The wireless router supports both DHCP client and server, enabling
system administrators to easily integrate this wireless router into existing network
environments, as well as manage IP assignment, without reconfiguring other stations.
3. SCOPE
This document defines and details the Work Instruction (WI) and implemented technical
support for GUI via configuration mode as defined below:
a. Allowed synchronize to network
To ensure the Residential Gateway is able to synchronize with Public network
(wireless or wired connection) and Private network (wireless connection only) to be
connected simultaneously.
b. Dynamic IP Address & Static IP Address
To ensure the RG is able to support Dynamic IP address and Static IP address.
c. Internet Service (on IPv6)
To ensure the RG is able to surf the Internet without any limitation on IPv6 network.
To Next Page
Loading...